Description

Spiral Inner Diameter Micrometer Measuring Tool- Platinum DescriptionMain Features:

Made Of Stainless Steel, Chrome-Plated, Durable And Durable

Mainly Used For Measuring Various Internal Sizes

High-Quality Alloy Measuring Head Can Be Used For Various Internal Measurement, Fine Workmanship, No Burr

Clear Laser Markings For Easy Reading

Locking Device Design And Precise Mechanical Structure Make It More Intuitive And Easier To Read

Built-In Ratchet Stop To Ensure Accurate Repeat Readings

Calibration And Zeroing Method: Clean The Surface Of The Measuring Anvil With A Soft Cloth, Then Turn The Measuring Device To Make The Two Measuring Surfaces Contact

Material: Stainless Steel + Wood

Resolution: 0.01Mm

Error: À 0.004 / 5 / 6Mm

If The Two Zero Lines Of The Differential Sleeve And The Fixed Cylinder Are Not Aligned, Use The Following Two Methods To Adjust.

If The Error Is Less Than 0.02Mm ( 0.001 Inch ), Use A Ratchet Stopper To Lock The Screws, And Then Use A Wrench To Pull The Fixing Cylinder Until The Two Zero Lines Are Aligned.

If The Error Is Greater Than 0.02Mm ( 0.001 Inch ), Tighten The Screws With A Ratchet Stopper, Then Use A Wrench To Loosen The Ratchet Stopper And Remove The Differential Sleeve. Realign The Zero Line Of The Fixed Cylinder And The Differential Sleeve, Then Reinstall The Ratchet Stop.

Note:

Common Micrometers Do Not Require Calibration. Micrometers Need To Be Calibrated Only When They Are Severely Worn.SpecificationDimensions And WeightProduct Weight: 0.2000 Kg

Package Weight: 0.2400 Kg

Package Size(L X W X H): 16.30 X 8.10 X 6.00 Cm / 6.42 X 3.19 X 2.36 InchesPackage Contents

Most Popular in Calipers

garden sofa set, black white and grey bathroom, electrician penicuik, bathroom with separate shower and bath, ,

yyyyy